|
HIGH VOLTAGE INSULATION BREAKDOWN TESTER
AC
|
dot - 450
|
|
|
INTRODUCTION:
High Voltage Breakdown tester is useful for checking high voltage withstanding capacity of insulation
material. Therefore to determine the quality of insulation. The test level depends upon the working
voltage of insulation material / electrical apparatus or as per ISI requirements.
|
APPLICATIONS:
Useful for manufacturers of Insulation Material, Transformers, Switchgear, Varnishes, Pump, Motors,
Electrical apparatus, Cables, Wire, Capacitors, Electrical & Electronics component manufacturers.
|
|
TECHNICAL SPECIFICATIONS:
|
|
VOLTAGE
|
: 0 - 5 KV AC
|
|
LEAKAGE CURRENT
|
: 100 mA
|
|
METER
|
: Analog (moving coil) separate meter for voltage & current
|
|
ACCURACY
|
: +/- 5% ( for 10% to 100% ranges)
|
|
AUDIO BUZZER
|
: Buzzer turns ON when HT is ON
|
|
HT TERMINATION
|
: By HT probe (suitable to withstand 20
KV)
|
|
TRIPP CURRENT SELECTION
|
: Selectable in three steps of 25%, 50% &100%.
|
|
HT ON
|
: Red lamp indication.
|
|
HT OFF
|
: Green lamp indication
|
|
INSULATION BREAKDOWN
|
: Yellow lamp remains on after insulation breakdown takes place.
|
|
POWER REQUIREMENT
|
: 230+/- 10% V AC, 50 Hz, single phase
|
|
HT INCREASE/DECREASE
|
: Manually
|
| CABINET SIZE: |
: 19", 3U rack, 300 depth.
|
| |
|
The Instrument is supplied with HT Probe, mains cords, spare fuse,
comprehensive operating manual. |
|
|
